Ensure your clamping mode matches your machine layout (e.g., matrix table or pod-and-rail setup). WoodWOP 5.0 uses a standard Cartesian coordinate system. By default: Moves left to right. Y-Axis: Moves front to back.
When you open WoodWOP 5.0, you are greeted with a split-screen layout. Let's label the four critical zones:
This simulation capability allows you to verify programs thoroughly before running them on actual material, saving both time and costly mistakes. woodwop 5.0 tutorial
Click on the icon and link it to the contour you just drew.
| Error Code | Text Hint | The Fix | | :--- | :--- | :--- | | | "Tool not defined" | You forgot %TOOL= X or the tool doesn't exist in the machine's tool.location file. | | E201 | "Over travel" | You are trying to machine at X=-10, but your machine's home is X=0. Check your workpiece offset. | | E452 | "Cycle incomplete" | You used CYCLE 81 but forgot the Z= parameter. Re-read the syntax. | Ensure your clamping mode matches your machine layout (e
: Version 5.0 introduced advanced wizard technology for easier edge banding programming.
. Programming follows a logical workflow: defining the workpiece, applying processing macros (drilling, milling, sawing), and generating the machine-readable MPR file. 1. Define the Workpiece The first step is establishing the panel dimensions ( ) and material properties. Variable Table : Use the variable table to define dimensions (e.g., Y-Axis: Moves front to back
: For complex shapes, use the "Contour" menu. Ensure your contour is "closed" if you plan to do a pocket milling operation.
Educación
Servicios sociales
Sostenibilidad
Empleo y formación