Ts1162 Installation Manual

The keypad communicates via the Challenger’s proprietary RS-485 bus. Plan the path for the data cable from the keypad's location back to the main controller panel. Ensure the cable is routed away from sources of electrical interference, such as high-voltage power cables or large motors.

For in-depth programming and system-level instructions, you will need to consult the main . These can often be found on the product support sections of the Aritech or Interlogix websites and include Programming Manuals, User Manuals, and Installation and Quick Programming Guides. The Interlogix support portal may require you to download CTPlus installer software to access the latest firmware for the TS1162 and other system components.

Drill out the necessary structural holes and slide the field wiring through the central rear cutout. ts1162 installation manual

Use a dry, anti-static cloth to remove dust from the vents to prevent overheating.

Access the configuration menu via the onboard display or the connected software utility. Drill out the necessary structural holes and slide

Prevents the machine from constantly cycling on and off. If your setpoint is 20°C and Hysteresis is 2°C in heating mode, the heater turns on at 18°C and shuts off at 20°C.

Double-check all wiring connections for shorts or loose strands. Apply power to the source supply line. Remote Arming Station (RAS) Keypad

Once hardware installation is complete, follow these configuration steps to initialize the device.

: Ensure all power is disconnected from the Challenger panel or Intelligent Access Controller before starting any wiring to prevent damage.

Remote Arming Station (RAS) Keypad, 3 LED * Robust moulded plastic housing. * Indoor or outdoor mounting. * Request to Exit input. aritech.com.au Tecom TS1162 3 LED RAS - Ness Corporation

[ Challenger Panel LAN Terminal ] <=======> [ TS1162 Keypad Board Terminal ] +12V DC -------------------------> +12V (Positive Power Input) 0V -------------------------> 0V / GND (Ground Reference) D+ -------------------------> D+ (RS-485 Data Positive) D- -------------------------> D- (RS-485 Data Negative) Step 5: Connect Auxiliary Inputs & Door Controls