Simco Fmx002 Manual __hot__ Full Jun 2026

By simply pointing the device at a target, users can instantly determine if the static charge level is within safe parameters for their specific environment. It is a staple tool in industries where electrostatic discharge (ESD) can damage sensitive electronic components, create dangerous sparks, or ruin product quality, such as in semiconductor manufacturing, plastics processing, printing, and cleanroom operations.

Move the meter closer or further away until the two red light beams project onto the target surface and merge into a single, concentric ring. Once the rings merge, the meter is at exactly 25 mm. Step 4: Reading the Values Read the numerical value on the LCD.

: Press the HOLD button to freeze a reading on the display, which is helpful in tight spaces where the screen is hard to see. Technical Specifications SIMCO FMX-004 Electrostatic Field Meter User Manual

Slide open the battery compartment door on the lower back of the unit. Remove the depleted 9V battery. simco fmx002 manual full

: Conductive plastic with a dedicated ground snap mechanism. 2. Structural Features & Display Interface

The Simco FMX-002 is a compact, pocket-sized electrostatic fieldmeter used to locate and measure static charges. It provides accurate, non-contact measurements of electrostatic voltages on surfaces, making it an essential tool for electronics manufacturing, cleanrooms, and automated production environments.

| Model | Key Features | | :--- | :--- | | | Original version. Features two red LED focus lights and a 2-button operation for basic field and ion balance modes. | | FMX-003 | An intermediate update with "new technological elements", a refreshed user interface, and updated internal components. | | FMX-004 | Current mainstream version. It boasts an extended ±30kV range, a 4-button interface for greater control, and digital features like data hold. | By simply pointing the device at a target,

: To measure residual voltage from ionizers, attach the ion balance plate to the sensor end and press POWER and ZERO simultaneously. The display will indicate "Hi" and blink every second. Visual Indicators Digital Display : Shows numerical voltage values.

Press the button. The device will emit a short beep, and the LCD display will initialize.

: Simco recommends annual calibration to maintain the accuracy standard. Once the rings merge, the meter is at exactly 25 mm

Slide open the battery compartment door located on the lower back of the unit.

To capture a measurement in a hard-to-reach area, press the button. This freezes the current reading on the display. To return to real-time measurement, press the HOLD button again. 3. Maintenance and Care To maintain the accuracy and lifespan of the