Sagemcom Cx2000-9 Manual Pdf File
Without the manual, you are essentially guessing. With it, you gain administrative control.
Blacklist specific URL keywords to filter inappropriate content. 🔄 Factory Reset and Firmware Updates How to Perform a Factory Reset
What are you trying to configure? (e.g., port forwarding, parental controls, bridge mode) sagemcom cx2000-9 manual pdf
Enter the local static IP address of the device requiring the open port.
: Provides digital flipbooks of technical brochures and feature lists. Sagemcom CX2000-9 User Manual | PDF | Electricity - Scribd Without the manual, you are essentially guessing
Enter your new password in the or Wi-Fi Password field (minimum 8 characters).
: Equipped with a 120A relay or latching relays for remote customer disconnection and load management. Available Manuals and Datasheets Official Datasheet 🔄 Factory Reset and Firmware Updates How to
| Feature | Specification | | :--- | :--- | | | Three-phase direct connection energy meter | | Communication | PLC PRIME protocol (Power Line Communication), G3-PLC certified | | Voltage References | Operates on 230/400V or 127/220V three-phase networks | | Current Range | Reference: 5A, Maximum: 80A, Minimum accuracy threshold: 0.25A | | Frequency | Nominal: 50 Hz (Operating range: 47-52 Hz, Limits: 42.5-57.5 Hz) | | Self-Consumption | 2W, 10VA per phase (without active communication) | | Measurement Accuracy | IEC 62053-22 class 0.5S / IEC 62053-23 class 2 | | Power Supply Interruption Tolerance | <300ms at 230V, <150ms at 127V (Data saved in EEPROM) | | Temperature Range | Operation: -40°C to +70°C; Storage/Transport: -55°C to +85°C | | Humidity | ≤ 95% at 40°C (with condensation) | | Mechanical Protection | IP54 and IK02 (EN 50102) | | Safety Standard | EN 50470-1 / Protection class II, for indoor use | | Firmware Version | 7.5.7.110 (according to G3-PLC certificate) | | Dimensions | 160mm (L) × 120mm (W) × 73mm (H) | | Weight | Approximately 950g | | Display | LCD with 8-digit (999999.99 kWh) |
If a mistake is made later, use the option in this same menu to upload this file. Firmware Updates