Qidi - Xplus Firmware Install !!top!!

| Problem | Most Likely Fix | | :--- | :--- | | Screen stays blue after mainboard update | Bad SD card format. Re-format FAT32, 4096 bytes. Use a 4GB or 8GB card. | | UI update hangs at “0/128” | The DWIN_SET folder is corrupted. Re-download the zip and replace the folder. | | Printer boots but touchscreen doesn’t work | You updated the mainboard but not the UI. Go back to Step 5. | | “No printer attached” error | The ribbon cable between screen and mainboard is loose. Happens during vibration. Re-seat it. |

If you run into ongoing trouble:

Always rerun Bed Leveling , Input Shaper , and Z-Offset calibration immediately after a firmware change. New firmware often resets factory offset values. To help give you the exact steps, let me know:

The printer's bootloader cannot read NTFS or exFAT formats. Format your USB drive to FAT32 with a 4096-byte allocation unit size. qidi xplus firmware install

the printer. The printer will detect the firmware and start the upgrade process automatically.

Download the correct firmware package for your specific model (e.g., Go to product viewer dialog for this item. Go to product viewer dialog for this item. Extract the ZIP or RAR file on your computer.

: Run the vibration compensation routine to maintain high-speed print accuracy. Troubleshooting Tips | Problem | Most Likely Fix | |

Join the r/QIDI community on Reddit before updating. Search for your exact firmware version number. Sometimes the community finds bugs before QIDI posts a retraction.

Download the latest stable .bin file (for standard Chitu-based boards) or the image update pack (for Klipper-based systems). Extract the .zip archive if the firmware comes compressed. 💾 Step 2: Preparing the USB Flash Drive

Turn off the printer. Delete the files from your USB, re-download the firmware package, and extract them again. Rename the update file if instructed by QIDI support documentation, re-insert the drive, and reboot. If the screen remains unresponsive, contact QIDI support to obtain the boot recovery tool. UI Language Resets to Chinese | | UI update hangs at “0/128” |

Which specific version do you have (the , X-Plus II , or X-Plus 3 )?

Which do you have (the original X-Plus or the Klipper-based X-Plus 3)?