Immediately remove all contaminated clothing. Wash the affected skin thoroughly with plenty of soap and water. If irritation or symptoms persist, consult a doctor.
Wear chemical-resistant gloves (nitrile or butyl rubber), safety goggles, and protective clothing. If used in confined spaces, a respirator with an organic vapor filter is required.
Yes, like most epoxy products, it can be harmful to aquatic organisms. Prevent any spills or discharge into waterways. nitocote nt402 msds
Fosroc Nitocote NT402 is a two-part, tar-free epoxy resin coating designed for high-performance protection of concrete and steel. It is primarily valued for being environmentally friendly, containing no volatile organic compounds (VOCs) and being free of carcinogenic materials like coal tar or pitch. Critical Safety & Hazard Overview
A: It is recommended for use down to 5°C. Materials should be stored in a heated area until immediate use. Immediately remove all contaminated clothing
This section provides the official trade name.It lists the manufacturer details and emergency contacts.Always call these numbers during chemical spills. 2. Hazards Identification
Advantages * Environment friendly - no VOC. Totally free of carcinogenic materials like coal tar, pitch and aromatic hydrocarbons. Fosroc Nitocote NT402 - SCP Products Prevent any spills or discharge into waterways
Provide the correct for the base and hardener. Outline the step-by-step application procedures . Let me know how you would like to proceed! Nitocote NT402 - Fosroc
| Exposure Route | Immediate Action | |----------------|------------------| | | Remove to fresh air. If breathing difficulty, give oxygen. | | Skin contact | Wash immediately with soap & water. Remove contaminated clothing. For allergic reactions, seek medical attention. | | Eye contact | Rinse cautiously with water for ≥15 minutes. Remove contact lenses. Immediate medical attention required (especially for Part B). | | Ingestion | Do NOT induce vomiting. Rinse mouth. Seek medical help immediately. |
Generally applied in two coats at a wet film thickness (WFT) of 200 microns per coat.