Mx1616 Motor Driver Datasheet ((free))

ceramic capacitor in parallel with the bulk capacitor to filter out high-frequency noise.

Connecting the MX1616 to an Arduino is straightforward. This example demonstrates how to control the speed and direction of a single motor (Motor A). Wiring Guide MX1616 →right arrow Arduino 5V or External Battery Positive (1.8V - 7V) MX1616 GND →right arrow Arduino GND MX1616 INA1 →right arrow Arduino D5 (PWM Pin) MX1616 INA2 →right arrow Arduino D6 (PWM Pin) Sample Arduino Code

The following code snippet demonstrates controlling two DC motors:

Here is a comprehensive datasheet and application guide. Mx1616 Motor Driver Datasheet

Prevents unpredictable motor behavior or MOSFET damage by shutting down operation if the supply voltage drops below the minimum threshold.

The L298N uses outdated bipolar junction transistors (BJTs), causing a massive voltage drop (up to 2V-4V) and producing significant heat. The MX1616 uses MOSFETs, meaning near-zero voltage drop and much higher efficiency, making it far superior for small battery-operated projects.

Up to 1.5A per channel (depending on thermal dissipation) Peak Output Current: 2.5A per channel (surge protection) ceramic capacitor in parallel with the bulk capacitor

The Mx1616 motor driver datasheet highlights the following key features and specifications:

Prevents "shoot-through" currents by ensuring the high-side and low-side MOSFETs of the same H-bridge arm are never turned on simultaneously. 5. Circuit Diagram and Arduino Integration

+---+--+---+ INA1 | 1 8 | OUTA1 VCC | 2 7 | OUTA2 OUTB1| 3 6 | INB1 OUTB2| 4 5 | INB2 +----------+ Pin Description Table Wiring Guide MX1616 →right arrow Arduino 5V or

The MX1616 is housed in a standard . It partitions power management, logic input, and high-current motor outputs symmetrically across its 16 pins. MX1616 1.5A Dual Motor Driver Module - Art of Circuits

The MX1616H is a dual-channel, MOSFET-based H-bridge DC motor driver IC designed for low-voltage, small-scale robotics applications, operating between 2V and 8.6V. It provides a continuous output current of 1.3A to 1.6A per channel, features internal thermal protection, and acts as an efficient alternative to older drivers like the L298N. For complete technical details, consult the Sinotech Mixic Electronics datasheet . MX1616H - Mikrocontroller.net

| Parameter | Value | | :--- | :--- | | | 8V to 36V DC | | Logic Supply Voltage (VDD) | 3.3V to 5V DC | | Output Current (per phase) | Up to 1.6A continuous (1.8A peak) | | Microstep Resolution | Full, 1/2, 1/4, 1/8, 1/16 | | RDS(on) (High Side + Low Side) | 0.45Ω (typical) | | Protection Features | Overcurrent, Over-temperature, Short-to-ground | | Package Type | QFN-24 (surface mount) or standard 16-pin DIP-like breakboard |

The Mx1616 motor driver datasheet highlights various applications where the IC can be used, including:

The direction of each motor (Motor A or Motor B) is controlled by the logic levels on the input pins (IN1-IN4): INx (1/3) Motor Status Low Standby / Stop High Low Low High High High