Motomasterbatterycharger111567manual Full //free\\ File

: Detects if the battery plates are sulfated. It pulses a low current to break down sulfation build-up and restore lost capacity.

[ DIGITAL DISPLAY: Amps / Volts / Error Codes ] ================================================== [ BATTERY TYPE ] ---> Conventional | AGM | Gel Cell [ CHARGE RATE ] ---> 2A (Slow) | 12A (Fast) | 75A (Engine Start) 1. Battery Type Selection

Connect the charger clamp to the positive battery post. motomasterbatterycharger111567manual full

: Features a 10A fast charge for rapid recovery and a 2A slow charge (trickle) for maintaining smaller batteries or long-term storage.

: Connect the positive (red) clamp to the positive terminal first, then the negative (black) clamp to the vehicle chassis or a solid metal part of the engine block—never directly to the negative terminal if the battery is still in the car, to avoid sparks. : Detects if the battery plates are sulfated

, keeping the battery topped up without the risk of overcharging. Motomaster-battery-charger-11-1567-manual - Facebook

Connect and disconnect the DC output clamps only after setting any charger switches to the OFF position and removing the AC cord from the electric outlet. Never allow the clamps to touch each other. Battery Type Selection Connect the charger clamp to

: Standard flooded lead-acid, maintenance-free, or deep-cycle marine batteries. AGM : Absorbed Glass Mat flat-plate or orbital batteries. Gel Cell : True gelled electrolyte batteries. 2. Charge Rate Selection