Magicsee R1 User Manual -

Perform a hard reset. Insert a thin paperclip or pin into the tiny reset hole located near the charging port or back casing. Press gently until you feel a click. The device will reboot instantly.

Found on the side; used to turn the device on/off and switch operating profiles.

The device features an ergonomic ring design with a central joystick and multiple perimeter buttons.

Turn off Bluetooth on your phone, turn it back on, and restart the Magicsee R1. Clear the "Magicsee R1" cache from your previously saved Bluetooth connections list if it was paired before. Issue: The mouse cursor is moving on its own (Drifting). Magicsee R1 User Manual

Magicsee ships two firmware variants. Identify yours:

Act as primary triggers or back buttons for VR apps. 📸 Selfie / Shutter Mode (M + Y) Function: Turns the remote into a wireless camera shutter.

Magicsee R1 User Manual: The Ultimate Setup & Troubleshooting Guide Perform a hard reset

As she navigated the manual’s "Troubleshooting" section, she realized the "Error Code 404" wasn't a connection failure. It was a prompt. By following the "Reset to Factory Settings" steps while standing in the center of her room, she felt the walls of her physical world thin out.

Control volume up/down, play, pause, and track skip. 🎮 Game Mode (M + B)

Regularly update your device to ensure optimal performance: The device will reboot instantly

| Problem | Possible Solution | | :--- | :--- | | | 1. Ensure the controller is powered on and the blue light is flashing. 2. On your phone/PC, ensure Bluetooth is on and you've searched for new devices. 3. Try toggling your device's Bluetooth off and on. 4. Restart your phone/PC and the controller to reset the connection. | | Controller is Recognized as a Keyboard, Not a Gamepad | You are likely in Mode M+B (keyboard emulation mode). The solution is to press a specific button combination to switch to a different mode. Try pressing the Mode button on the side along with a button (e.g., Mode + A ) to switch to a gamepad mode. | | Buttons Aren't Doing What I Want | Install a key mapper app as detailed above and set your own custom button assignments. | | The Directional Pad is Inaccurate | The Magicsee R1's directional pad is digital , not analog. It only registers 4 directions (up, down, left, right), not 8-way movement or pressure sensitivity. | | 'A' or 'C' Buttons Act as Multiple Keys | This is a known design quirk. The controller may register the A button as two button presses simultaneously (e.g., button 5 and 10). A key mapper app may be able to work around this by intercepting only one of the signals. |

Q: How do I reset the Magicsee R1 to its factory settings? A: Go to Settings > System > Backup & Reset > Factory Reset.

The Magicsee R1 has four primary modes. To switch between them, hold the button and press one of the following:

Before using your Magicsee R1 for the first time, it is highly recommended to charge the battery fully.