Before initiating the firmware update process, you must complete several preparation steps to prevent system corruption or data loss. 1. Verify Current Hardware Revision
use firmware from an unknown source. Ensure it is specifically for the IPG-8150PSS.
: Fixes for frame dropping or "ghosting" in low-light conditions. Ipg-8150pss Firmware Update 2021
A primary issue resolved in the 2021 maintenance cycle involves data loss after power cycles. Prior firmware configurations suffered from a memory-allocation bug where manually restarting the dome camera or losing power caused the device to lose all configured cruising paths and preset surveillance coordinates. The update patches database retention scripts so that configurations survive sudden power outages. 2. Enhanced Resolution Stability
: Do not power off or refresh the page. The process takes 3–5 minutes, after which the camera will auto-reboot. 4. Alternative: Update via Mobile App If your camera is connected to the XMeye or P6SLite apps: Before initiating the firmware update process, you must
Fixed coordinate tracking issues where cameras lost their preset positions after a hard reboot.
To update the firmware of your IPG-8150PSS camera (typically an XMeye/Xiongmai module), follow this guide to identify the correct 2021 version and install it safely. Step 1: Identify Your Current Version Ensure it is specifically for the IPG-8150PSS
Access the administration dashboard (Default user name: , Default password: 123456 or blank).
: Digital Wide Dynamic Range (WDR), 2D/3D noise reduction, and custom motion detection. Why the 2021 Update is Mandatory
Updating the IPG-8150PSS is not as simple as clicking "update" in a GUI. You need the following:
: Adding or refining "humanoid detection" and alarm functions.