Leave at least 1U of space above or below if operating in high-temperature environments. 2. Cable Connections

Inspect the fiber optic connectors on the hybrid cable. Clean the optical ferrules with an approved fiber cleaning tool before mating.

| LED | Color | State | Meaning | |-----|-------|-------|---------| | POWER | Green | Solid | Normal operation | | POWER | Red | Solid | Overcurrent / short | | CAM LINK | Green | Solid | Camera detected & synced | | CAM LINK | Red | Flashing | Cable fault / no video from camera | | VIDEO | Amber | Solid | Valid output signal | | GENLOCK | Green | Flashing | Locked to external reference |

The Ikegami BSF-300 and BSF-300L base stations are robust, feature-rich, and flexible fiber transmission systems. They are engineered to provide broadcast-quality video and audio, reliable remote control, and power delivery over long distances. Whether integrated into a permanent studio at an institutional facility like a congress center or deployed in a mobile production truck, the BSF-300 is a key component for professional camera operation. For any owner or operator, consulting the full operation manual of the associated camera system (e.g., HDK-73, HC-HD300) is essential for step-by-step guidance, safety warnings, and detailed configuration instructions.

Set the tally input logic to either dry contact closure or voltage control depending on your production switcher's specifications. 5. Maintenance and Troubleshooting

Uncompressed HD/SD-SDI via SMPTE hybrid fiber cable.

: The most common cause of signal failure. Regular cleaning of the Neutrik or LEMO tips is mandatory.

The BSF-300 transmits uncompressed, high-quality images with no compression or transmission delay.