: Critical for your Windows PC to communicate with a bricked device.

on the device motherboard while connecting it to the PC via USB to enter COM 1.0 mode.

Re-verify Test Point locations; reinstall Huawei USB COM 1.0 driver. The chosen COM port is busy or mismatched.

The (Image Deployment Tool) is a specialized utility primarily used by technicians and advanced users to revive "bricked" Huawei devices—those that are stuck on a logo or cannot boot into their operating system. The Evolution of the Tool

Right-click the installer executable and select .

For bricked phones:

Under the image path settings, click browse and locate the factory board firmware folder you downloaded.

: It is the go-to tool for devices stuck in a "black screen" or EDL (Emergency Download) state where the bootloader is corrupted.

Restart your PC into mode. Install the Huawei USB COM 1.0 Driver .

IDT 2.0 is a proprietary XML-based flashing utility developed for Huawei devices. It is primarily designed to flash raw factory firmware components (such as boot, recovery, system, and fastboot images) when a phone cannot boot into standard Fastboot or Recovery modes. Key Features

Utilizes custom USB COM interfaces to push data even when the screen or recovery mode is completely unresponsive. System Requirements

: Can often flash multiple devices simultaneously via different COM ports.

Typically supports connecting and flashing multiple devices simultaneously, common in industrial/service settings.

Check Device Manager. If it shows a yellow warning triangle next to the device, uninstall the driver, reboot Windows, disable driver signature enforcement, and re-install the Huawei USB COM drivers. Try a different USB port (preferably a USB 2.0 port on the back of the motherboard). Error: Image Verification Failed / Build Mismatch

Close conflicting software (like HiSuite or local terminal utilities); change the port assignment in IDT to match Device Manager. Incompatible firmware XML for the target chipset.