Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 ❲TRUSTED❳

Proceed through the setup until the screen appears. If no drives are listed, this is normal. Click Load Driver and insert your USB flash drive.

Output should show Status = OK .

Filter the Operating System subcategory to . hpe smart array s100i sr gen10 driver windows server 2022

This is not a hardware failure. It is a missing driver symptom. Windows Server 2022 has no native storport miniport driver for the S100i's PCI device ID (typically PCI\VEN_8086&DEV_A382 or similar).

Without the proper driver, you will encounter the error during the Windows installation wizard, or the server may fail to boot. 1. Downloading the Driver The official driver for the HPE Smart Array S100i SR Gen10 Go to product viewer dialog for this item. Proceed through the setup until the screen appears

As of this writing, the recommended driver version is 6.3.0.57 or newer. The file name resembles: HPE-Dynamic-Smart-Array-B140i-S100i-Driver-for-Windows-Server-2019-2022-v6.3.0.57.exe

: Copy the extracted files (including the .inf , .sys , and .cat files) onto a USB flash drive. 2. Configure RAID in UEFI Output should show Status = OK

November 2025 Driver version used in examples – 6.3.0.57. Always check for newer releases on HPE.com.

It requires the server's backup ROM or UEFI system utilities to be explicitly set to "RAID Mode" instead of "SATA AHCI Mode."

Unlike hardware RAID controllers (such as the HPE Smart Array P408i-a), the S100i is a solution. It relies on the server's CPU and memory to manage the RAID arrays. Key Characteristics

If Windows Server 2022 setup does not see your drives, you must load the driver.