Connect your Tecno Spark 6 Go to your computer using your micro-USB cable.
This method is ideal if your buttons are broken. You will need a computer and a USB data cable. Step-by-Step Guide:
and allow the USB debugging prompt on the phone (tap "OK"). how to open fastboot mode on tecno spark 6 go
: Your phone will automatically reboot into the fastboot interface. How to Exit Fastboot Mode
Modifying software at the fastboot level carries risks. Complete these steps before starting: Connect your Tecno Spark 6 Go to your
: Ensure the device has at least 50% charge to prevent it from shutting down unexpectedly during a system task.
Type the command to reboot into Fastboot Mode: adb reboot bootloader Step-by-Step Guide: and allow the USB debugging prompt
Tap on the 7 times continuously until a pop-up says, "You are now a developer."
Use the to navigate down through the options. Highlight the option labeled Reboot to bootloader . Press the Power button to select it.
: When the Android Robot with the "No Command" message pops up, release the Enter Recovery : To bypass the "No Command" screen, hold the Power button and tap the Select Fastboot : In the Recovery menu, use the Volume keys to navigate and highlight "Enter fastboot" "Reboot to bootloader" : Press the Power button to select it. Your device will now boot into Fastboot Mode. Method 2: Using ADB (For Computer Enthusiasts)
Tap on 7 times until it says "You are now a developer". Go back to Settings > System > Developer Options . Toggle on USB Debugging .