This is the most common product associated with the name. These are instant electric showers, popular in the UK and other markets, designed to heat cold water on demand as it flows through the unit. The brand name "Galaxy" is well-established for showers, with "Aqua" indicating the model series, such as the Aqua 1000, Aqua 3000, and the "Premiere" (often misspelled as "Premier") electric water heater. This guide will cover the electric shower in the most depth, as it is the version for which the most detailed public technical information is available.
Congratulations! You have successfully installed your Galaxy Aqua Premier water treatment system. With proper maintenance and replacement of filters, your system will provide you with clean and safe drinking water for years to come. If you have any questions or concerns, please refer to the manufacturer's instructions or contact our customer support team.
6mm² or 10mm² twin and earth cable (depending on the kW rating and cable run length).
Ensure the hose is not kinked or damaged, as this can trigger the Pressure Relief Device (PRD).
The feed water adapter connects your existing plumbing to the purifier. Turn off the main water supply to the cold water line.
Tighten the adapters firmly with an adjustable wrench. Do not overtighten, as this can crack the plastic head. 4. Cutting the Main Supply Line
Assuming you have a standard three-stage Galaxy Aqua Premier system (non-RO), follow this sequence:
| Feature | Specification | | :--- | :--- | | | 220-240V AC, 50/60Hz | | Power Rating | See unit rating plate (Typically 9kW - 10.5kW) | | Required Cable Size | 6mm² or 10mm² (Depending on model/kW rating) | | Fuse Rating | 40A / 45A (Dual Pole Switch) | | Minimum Water Pressure | 0.1 MPa (1.0 Bar) | | Maximum Water Pressure | 0.5 MPa (5.0 Bar) | | Temperature Range | Ambient to 55°C (Adjustable) |
This section shows an exploded view of the system. Identify each component:
In hard water areas, soak the shower head in a de-scaling solution regularly to prevent blockages.
If your product is from in India, you have a reverse osmosis (RO) water purification system. If you have an Aquapremier (note spelling) system from Multipure , you have a carbon block water filter. The following is a guide and does not replace the official manual.
| Task | Frequency | |------|-----------| | Clean mechanical filter pad | Weekly | | Rinse biological media (in old tank water) | Monthly | | Inspect hoses/clamps for wear | Quarterly | | Descale pump impeller | Every 6 months | | Replace check valve | Every 2 years |
Galaxy Aqua Premier Installation Manual «Secure »»
This is the most common product associated with the name. These are instant electric showers, popular in the UK and other markets, designed to heat cold water on demand as it flows through the unit. The brand name "Galaxy" is well-established for showers, with "Aqua" indicating the model series, such as the Aqua 1000, Aqua 3000, and the "Premiere" (often misspelled as "Premier") electric water heater. This guide will cover the electric shower in the most depth, as it is the version for which the most detailed public technical information is available.
Congratulations! You have successfully installed your Galaxy Aqua Premier water treatment system. With proper maintenance and replacement of filters, your system will provide you with clean and safe drinking water for years to come. If you have any questions or concerns, please refer to the manufacturer's instructions or contact our customer support team.
6mm² or 10mm² twin and earth cable (depending on the kW rating and cable run length).
Ensure the hose is not kinked or damaged, as this can trigger the Pressure Relief Device (PRD). galaxy aqua premier installation manual
The feed water adapter connects your existing plumbing to the purifier. Turn off the main water supply to the cold water line.
Tighten the adapters firmly with an adjustable wrench. Do not overtighten, as this can crack the plastic head. 4. Cutting the Main Supply Line
Assuming you have a standard three-stage Galaxy Aqua Premier system (non-RO), follow this sequence: This is the most common product associated with the name
| Feature | Specification | | :--- | :--- | | | 220-240V AC, 50/60Hz | | Power Rating | See unit rating plate (Typically 9kW - 10.5kW) | | Required Cable Size | 6mm² or 10mm² (Depending on model/kW rating) | | Fuse Rating | 40A / 45A (Dual Pole Switch) | | Minimum Water Pressure | 0.1 MPa (1.0 Bar) | | Maximum Water Pressure | 0.5 MPa (5.0 Bar) | | Temperature Range | Ambient to 55°C (Adjustable) |
This section shows an exploded view of the system. Identify each component:
In hard water areas, soak the shower head in a de-scaling solution regularly to prevent blockages. This guide will cover the electric shower in
If your product is from in India, you have a reverse osmosis (RO) water purification system. If you have an Aquapremier (note spelling) system from Multipure , you have a carbon block water filter. The following is a guide and does not replace the official manual.
| Task | Frequency | |------|-----------| | Clean mechanical filter pad | Weekly | | Rinse biological media (in old tank water) | Monthly | | Inspect hoses/clamps for wear | Quarterly | | Descale pump impeller | Every 6 months | | Replace check valve | Every 2 years |