Ft231x Usb Uart Driver Link Jun 2026

EPSON Status Monitor 3 is available for Windows Vista, XP, Me, 98, 95, 2000, and Windows NT 4.0. It allows you to monitor your printer’s status, alerts you when printer errors occur, and provides troubleshooting instructions when needed.

Note:

Windows 7 users:
Use the EPSON Status Monitor for the driver included in Windows 7, Download the EPSON Status Monitor and its manual from the EPSON Web site.
http://www.epson.com

EPSON Status Monitor 3 is available when:

The printer is connected directly to the host computer via the parallel port [LPT1] or the USB port.

Your system is configured to support bidirectional communication.

EPSON Status Monitor 3 is installed when the printer is connected directly and you install the printer driver as described in the Start Here. When sharing the printer, be sure to set EPSON Status Monitor 3 so that the shared printer can be monitored on the printer server and clients. See Setting up EPSON Status Monitor 3 and Setting Up Your Printer on a Network.

Caution:

Although you can print to the printer directly connected to the computer in a remote location by using Remote Desktop function* of Windows 7, Vista, or XP, communication error may occur.
* Remote Desktop function: Function which enables a user to access applications or files in a computer connected to the office network from a mobile computer at a remote location.

Note:

If you are using a computer running Windows Vista x64 Edition with multiple users are logged on, a communication error message may be displayed when monitoring printers at the same time.

Setting up EPSON Status Monitor 3

Follow these steps to set up EPSON Status Monitor 3:

Open the Utility menu as described in Using the Printer Driver with Windows 7, Vista, XP, 2000, and Windows NT 4.0 or Using the Printer Driver With Windows Me, 98, and 95.

Click the Monitoring Preferences button. The Monitoring Preferences dialog box appears.

The following settings are available:

Ft231x Usb Uart Driver Link Jun 2026

To use a device with an FT231X chip, the correct driver must be installed on your computer. This article provides the official driver links and a comprehensive guide to installing and troubleshooting them on Windows, macOS, and Linux.

This is a fake/clone chip issue. FTDI's newer drivers (v2.12.28+) intentionally misbehave with counterfeit chips. They will set the PID to 0x0000 or ignore the device.

. To ensure your hardware communicates correctly with your computer, you need to install the appropriate Virtual COM Port (VCP) Official Driver Download Link The most reliable source for FT231X drivers is the official FTDI VCP Drivers Page

FTDI Official Windows VCP Driver Setup Executable (Downloads a standard .exe installer for 32-bit and 64-bit systems). ft231x usb uart driver link

If you downloaded the architecture-specific .zip folder instead of the executable:

When standard uninstalls fail, FTDI provides dedicated tools to completely clean your system. This is a critical step for fixing corrupted installations.

Fully compliant with USB 2.0 Full Speed (12Mbps). Data Rates: Data transfer rates from 300 baud to 3 Mbaud. To use a device with an FT231X chip,

UMFT231XA USB to Full-Handshake UART Development Module - FTDI

When it comes to drivers, always go directly to the source to avoid malware or unstable third-party software. The manufacturer, FTDI Chip, provides all drivers free of charge.

sudo modprobe ftdi_sio

If you need an official driver download link for a specific OS (Windows, macOS, Linux) or instructions for installing and verifying the FT231X driver on your platform, tell me which OS you’re using and I’ll provide the direct official link and step-by-step installation notes.

Open a terminal and type ls /dev/tty.* . Look for an entry like /dev/tty.usbserial-XXXXX . Troubleshooting Tips

If not loaded automatically, manually load it: FTDI's newer drivers (v2

A "Code 10" error usually implies the device failed to start.

Linux users are in luck – the kernel includes the ftdi_sio driver. In 99% of cases, it works out of the box.

Note:

Click the Default button to revert all items to the default settings.

Top

Accessing EPSON Status Monitor 3

Do one of the following to access EPSON Status Monitor 3;

Double-click the printer-shaped shortcut icon on the taskbar. To add a shortcut icon to the taskbar, go to the Utility menu and follow the instructions.

Open the Utility menu, then click the EPSON Status Monitor 3 icon. To find out how to open the Utility menu, See Using the Printer Driver With Windows Me, 98, and 95 or Using the Printer Driver with Windows 7, Vista, XP, 2000, and Windows NT 4.0.

When you access EPSON Status Monitor 3 as described above, the following printer status window appears.

You can view printer status information in this window.

Note:

It might not be possible to retrieve the printer status during printing. In this situation, click the EPSON Status Monitor 3 button in the Utility tab, and use the printer with the status window left open.

Top

Installing EPSON Status Monitor 3

Follow the steps below to install EPSON Status Monitor 3.

Make sure that the printer is off and that Windows is running on your computer.

Insert the printer software CD-ROM in the CD-ROM drive.

Note:

If the language selection window appears, select your language.

If the EPSON Installation Program screen does not appear automatically, double-click the My Computer icon, right-click the CD-ROM icon, click Open in the menu that appears, then double-click Epsetup.exe.

Click Continue. When the software license agreement screen appears, read the statement, then click Agree.

Click Custom Install.

Click the EPSON Status Monitor 3 button.

In the dialog box that appears, make sure that your printer icon is selected, and click OK. Then follow the on-screen instructions.

When the installation is complete, click OK.

Top