Fnirsi 1014d Firmware Link

To avoid bricking your device, . Using modified or incorrect firmware can damage the oscilloscope's functionality.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Download the latest firmware file (usually named FSI-1014.bin ).

, navigate to the menu and select The oscilloscope will now act as a USB drive (approx. 8GB capacity).

According to the official product page, the FNIRSI 1014D is a 2-in-1 device combining a . Always check this page for the most up-to-date materials, as the company may occasionally release official firmware updates. fnirsi 1014d firmware link

If your computer fails to detect the oscilloscope, try a different USB port (preferably a USB 2.0 port on the back of the motherboard) or replace the USB cable. Ensure you have installed the USB drivers included in the firmware download package.

Turn off the 1014D and connect it to a PC using a USB data cable. Enter Update Mode:

Turn off your oscilloscope. Connect the USB data cable from the back of the FNIRSI 1014D to an open USB port on your computer. Step 2: Boot into Update Mode

On the device, go to MENU → USB export . This will mount the internal 8GB drive as a removable disk on your PC. To avoid bricking your device,

If your update fails midway or the device refuses to boot past the white splash screen, your firmware may be corrupted.

Download the latest firmware file from the official FNIRSI website. Connect to PC: Power on the and connect it to your PC using the USB-A to USB-A cable. Activate USB Export: On the

Disclaimer: Firmware links and procedures are subject to change. Always refer to the official documentation included with your device. This article is for informational purposes and is not official FNIRSI support.

While holding the button, insert the USB cable into the device and turn the power switch . This link or copies made by others cannot be deleted

Resolves occasional system freezes that occur when saving screenshots or exporting waveform data to a PC. Prerequisites Before Flashing

Redownload the firmware from the official link. Format the internal drive to FAT32 and re-flash. Interrupted file transfer.

Ensure the firmware matches your hardware revision (check your "System Info" in the device menu first). Common Fixes: Newer updates typically improve the FFT calculation speed and reduce trigger jitter Community Forums: If the official link is slow, users on the EEVblog Forum often share mirror links and custom modded firmwares. specific patch notes

Always ensure your device has a stable power supply during the update. If the wrong firmware is loaded and the screen becomes unreadable, you may need to open the device and manually format the internal SD card. EEVbloghttps://www.eevblog.com Reverse engineering the FNIRSI 1014D - EEVblog