Erickhill Rt-100 User Manual __top__

: Allows you to switch between real-time average readings and the "Peak" (maximum) value recorded during a session.

: Keep the device within 0–30 cm of the source for the most accurate readings.

Features a one-key data hold to freeze readings and a Peak Value mode to capture maximum radiation levels.

ERICKHILL provides for its products. If you encounter issues not resolved by this guide, contact their customer service team directly.

The device may have accumulated static electricity, or you are holding it too close to your body's natural static field. erickhill rt-100 user manual

: Hold the instrument and slowly move the front sensing area toward the object being tested.

"OL" stands for Overload. This means the electromagnetic field strength is higher than the maximum limit the sensor can handle (above 1999V/m or 99.99μT). Step back immediately. To help you get the most out of your device, tell me:

The chart is conveniently printed on the side of the device for quick reference. 2. What’s in the Box Erickhill RT-100 Circuit Tester 1 x User Manual 3. Safety Warnings Before using the , read these safety guidelines carefully:

| Parameter | Range | Resolution | Accuracy | | :--- | :--- | :--- | :--- | | | 0.00Ω ~ 20.00Ω | 0.01Ω | ±(2% reading + 3 digits) | | | 20.0Ω ~ 200.0Ω | 0.1Ω | ±(2% reading + 3 digits) | | | 200Ω ~ 2000Ω | 1Ω | ±(2% reading + 3 digits) | | Earth Voltage | 0V ~ 100V AC | 0.1V | ±(1.2% reading + 3 digits) | | Test Frequency | Approx. 800Hz - 1kHz (to avoid power frequency interference) | | | | Power Source | 6 x 1.5V AA Batteries (Typical) | | | | Weight | Approx. 500g - 800g (with batteries) | | | : Allows you to switch between real-time average

Turns the device on/off and switches between real-time and peak value modes.

Avoid storing the device in extreme heat or high-humidity environments. 🔍 Troubleshooting Common Issues The meter keeps showing "OL"

(hold for approximately 2–3 seconds) the Power button to turn off the detector. Alternatively, the device will automatically shut down after 5 minutes of inactivity.

The RT-100 has gained popularity in the ghost hunting community due to the theory that paranormal entities may cause fluctuations in electromagnetic fields. Libraries have even incorporated the RT-100 into "Library of Things" ghost hunting kits alongside EVP recorders and night vision cameras. ERICKHILL provides for its products

is a highly popular, budget-friendly handheld detector designed to measure low-frequency and magnetic fields (MF) . This comprehensive user guide synthesizes operational instructions, technical thresholds, and troubleshooting procedures directly from the official Erickhill Manuals & Downloads page to help you effectively manage household radiation exposure. Product Specifications & Thresholds

Microwave ovens and old desktop monitors emit significant electromagnetic fields. Hold the RT-100 roughly 12 inches away from the appliance and slowly bring it closer to map out the drop-off zone where radiation returns to a safe baseline. Power Lines and Circuit Boxes

: Short press to switch magnetic field readings between Microtesla ( T) and Milligauss (mG).