Cwfl-6000 Manual
This suggests a voltage drop. The pump’s required voltage is 380V ±10%. Below 340V, the pump loses torque. Install a voltage stabilizer.
The CWFL-6000 manual is a crucial resource for:
: Like many industrial manuals from Chinese manufacturers, some users note that the English translation can be stiff, requiring careful reading to understand specific parameter settings. cwfl-6000 manual
| Feature | CWFL-6000ENW12 | CWFL-6000FNP / ENP | | :--- | :--- | :--- | | | 6000W (nominal) | 6000W | | Temperature Stability | ±1°C | ±1°C | | Control Range | 5°C ~ 35°C | 5°C ~ 35°C | | Power Supply | AC 3P 380V 50Hz | AC 3P 380V 50/60Hz | | Compressor Power | 3.05 kW | 3.05 kW / 4.2 kW | | Tank Capacity | 22 L | 70 L | | Dimensions (L x W x H) | 142 × 73 × 113 cm | 105 × 71 × 136 cm (ENP) | | Weight (Net) | 164 kg | 170 kg |
By default, the CWFL-6000 starts via the front panel. To enable remote start: This suggests a voltage drop
: Do not run the system dry. Remove the filler cap and top vent, and fill the tank with deionized, distilled, or purified water until the level is within the green "NORMAL" range on the water level indicator.
Press any button on the temperature controller panel to mute the audible buzzer. However, the error code will continue to flash, and the laser interlock will remain open until the root cause of the error is physically corrected. 7. Storage and Decommissioning Install a voltage stabilizer
The chiller automatically adjusts the water temperature based on changes in the ambient room temperature. This minimizes the risk of condensation forming on expensive laser optics.
+-------------------------------------------------------------+ | INSTALLATION CYCLE | | | | [1. Clearance] --> [2. Fluid Fill] --> [3. Plumbing] | | 30cm/50cm Spacing Green Level Zone Dual Loops | | | +-------------------------------------------------------------+ 1. Environmental Positioning
Following the official ensures your 6kW laser chiller operates efficiently, preventing downtime and protecting your investment. By prioritizing proper installation and regular maintenance, you ensure the longevity and reliability of your laser cutting or welding operations.