Min: 5.0 bar (ensures minimum oil delivery)Max: Varies per model rating Control Selection (Loc / Etn)Run Configuration (Aut / cnt)
Set the minimum pressure required for your machinery rather than running at maximum potential.
: Critical fault due to excess final compression temperature. compair delcos 1000 bis manual top
Used for menu navigation, viewing total service hours, and setting nominal pressure values.
If the compressor fails to start or shuts down unexpectedly, the Delcos 1000 display will show an alarm code. Common checks include: Min: 5
For security, changing factory pre-settings or critical operating parameters requires an Access Code
: Malfunction due to high final compression temperature. LED f : Malfunction related to motor temperature. If the compressor fails to start or shuts
Scroll left/right or decrease/increase specific parameter values.
When a safety parameter is breached, the controller logs the failure in its internal fault storage, flashes a specific code, and shuts down the compressor to prevent internal damage. 1. Er1: Final Compression Temperature Excess
The compressor stops and enters standby if air is not required, restarting automatically upon pressure demand. Continuous (cnt):
The controller uses LED signals to alert operators of system status: