Ccna-2v7.0 Case Study -rev B- Jun 2026

IP addresses are excluded for static devices (e.g., the default gateway and management station) using ip dhcp excluded-address . Verification on a client PC involves using ipconfig (or show ip dhcp binding on the router) to ensure leases are obtained correctly.

: Applying best practices like port security, disabling unused ports, and configuring encrypted management access via SSH.

By following these tips and recommendations, candidates can achieve success in their CCNA 2 v7.0 case study - Rev B and take a significant step towards achieving their CCNA certification.

Configuring to segment traffic (e.g., separating Voice, Data, and Guest networks). ccna-2v7.0 case study -rev b-

Organize the network into logical segments to manage broadcast domains and security.

: On the Main Router or Multilayer Switch (MLS), configure sub-interfaces (for Router-on-a-Stick) or Switched Virtual Interfaces (SVIs) to allow communication between different VLANs. 3. Implement Layer 2 Security Secure the switch access layer against common attacks.

hostname R2 no ip domain-lookup enable secret cisco123 service password-encryption line console 0 logging synchronous password cisco123 login line vty 0 4 transport input ssh login local ! ip domain-name clearview.local username admin secret AdminPass1 crypto key generate rsa modulus 2048 IP addresses are excluded for static devices (e

: Build baseline device controls, SSH v2 lines, and modern Layer 2 switch security.

Compare and contrast traditional network architectures with controller-based models.

access-list 1 permit 192.168.0.0 0.0.255.255 ip nat inside source list 1 interface GigabitEthernet0/0 overload interface GigabitEthernet0/0 ip nat outside ! interface Serial0/0/0 ip nat inside By following these tips and recommendations, candidates can

To ensure connectivity between remote sites, the network relies on dynamic routing. The -Rev B- case study evaluates your ability to:

Separate broadcast domains for different units (e.g., Administration, Engineering, Sales, and Guest Wi-Fi).

It is crucial to always reference the specific instructions provided with your course material for the exact topology and requirements of your version.