Caselabs Sma8 Manual 🔔

: Slide the bottom panel in from the front and secure it. The rear panel requires significant fastening, typically using nine screws total.

Use the generous 1.5-inch clearance behind the motherboard tray to bundle fan cables, RGB controllers, and pump wiring. Secure them using zip-ties or Velcro straps along the integrated tie-down points. 6. Maintenance and Care

The PSU mounts in the lower chamber of the chassis to keep cables hidden and isolate thermal output.

The Ultimate CaseLabs Magnum SMA8 Assembly and Customization Manual caselabs sma8 manual

Ensure you check clearance if opting for an extra-thick radiator push/pull configuration. Bottom Chamber Mounting

: Secure the top panel frame to the four pillars. At this stage, do not over-tighten the screws; keep them "finger-tight" until the entire skeleton is aligned to ensure the doors hang straight later. 4. Motherboard Tray & Backplate

Which (e.g., 360mm, 480mm, 560mm) you plan to use. : Slide the bottom panel in from the front and secure it

Regularly clear the magnetic or slide-out dust filters installed over your intake fans to maintain optimum static pressure.

The front of the case consists of "Flex-Bays." These are modular slots that can be used for: 5.25" Drives : Using the ODD bay adapters. Fan Mounts : 120mm or 140mm fan inserts. Reservoir Mounts : Specifically designed for Tube or Bay reservoirs.

Prepare the motherboard tray by installing standoffs for your specific board size. Mounting the Motherboard: Slide the tray into the chassis. Rear Panel: Secure the rear I/O panel. Phase 3: Cable Management & Final Structure Secure them using zip-ties or Velcro straps along

Begin by joining the top panel and the front panel frame using the included countersink screws.

: The revived CaseLabs Manuals Page hosts digital copies of assembly guides and product specifications for download.