Turn off the main external water hookup or internal 12V water pump.
: The matching knob alters the heat profile. The integrated TMV2 safety system monitors temperature changes. If the cold water line drops pressure, the valve automatically cuts off the hot water flow to stop accidental scalding. Winterization & Drain-Down Instructions
can replace the older V100 valve without needing modifications to existing pipework
Screw your standard flexible shower hose onto the central 1/2" BSP bottom outlet. Operating Instructions
The Caraflo V200 is a popular, compact thermostatic mixing valve and shower system frequently installed in static caravans, touring vehicles, and marine environments. It provides precise temperature control and anti-scald protection in spaces where water pressure and temperature can fluctuate significantly. caraflo v200 shower instructions
Understanding the technical boundaries of your Caraflo V200 ensures optimal performance and prevents system damage. Minimum 0.5 bar, Maximum 5.0 bar.
Shut off the main water supply to the holiday home and drain the remaining lines.
Lift or twist the lever/knob to start the water flow.
is designed to replace the older V100 model without needing modifications The Caravan Warehouse Orientation : It can be installed in either a horizontal or vertical Pipe Centers : It features standard 45mm pipe centers Water Connections : Connect the water supply to the inlet marked "H" (or red label) and the supply to the "C" inlet (or blue label). Preparation Turn off the main external water hookup or
Use PTFE thread-sealing tape on the threads to ensure a watertight seal. Verify that the connectors are level using a spirit level. Step 3: Mount the Valve Body
Sarah started by turning on the water using the easy-to-use handle on the V200. She gave it a gentle pull, and the water began to flow. She was pleased to see that the water pressure was just right - not too strong, not too weak.
use abrasive powders, bleach, or industrial chemical cleaners, as they will permanently strip the protective chrome plating. Cleaning the Inlet Filters
Shut off the central caravan water supply and turn on all taps to drain remaining water from the internal lines. If the cold water line drops pressure, the
Hand-tighten the union nuts onto the wall fittings to ensure they are not cross-threading.
It features (the distance between the hot and cold water inlets). Connections :
Use a damp, soft cloth with mild detergent. Avoid abrasive cleaners or scourers, which can damage the finish.
同学您好！
