Autokent Mvci Multi Driver X64 Fixed [work]

: Translates USB-to-serial signals using an FTDI chip (often the FT232RQ) so the computer can communicate with the vehicle's OBD II protocol. Interface Selection

: Allows users to toggle between different driver versions (e.g., 1.4.x vs 2.0.x) to match their specific cable chip. Why Technicians Use It

Windows Defender or third-party antivirus real-time scanning temporarily.

Some cables are "1.4.1" or "2.0.4". The Autokent driver works with both, but sometimes you need to use the provided firmware update tool included in the package.

Click to lock in your configuration choices. Turn your vehicle's physical ignition key to the ON position (do not crank the engine), and select Connect to Vehicle to start processing active trouble codes. Troubleshooting Common Connectivity Failures Symptom / Error Code Root Architecture Cause Immediate Technical Fix Error: "Unable to connect to VIM" autokent mvci multi driver x64 fixed

Fully compatible with Windows 7, 8, 10, and 11 (64-bit).

: Allows users to read and clear Diagnostic Trouble Codes (DTCs), view real-time sensor data, and perform system checks.

Original MVCI diagnostic cables rely on firmware designed for older 32-bit Windows XP and Windows 7 operating systems. When 64-bit systems became the standard, the native drivers failed to load. This resulted in the notorious "Unable to connect to VIM" error in Techstream.

The software acts as a driver manager, allowing you to select and install multiple driver versions from one central interface. The main executable file, MVCI_MultiX64.exe , is approximately 148 KB, demonstrating how lightweight the core utility is compared to the massive driver bundles it supports. : Translates USB-to-serial signals using an FTDI chip

If you choose to proceed, disable antivirus protection only during installation and re-enable it immediately afterward.

: Reinstall the Microsoft Visual C++ 2008 SP1 Redistributable package and restart your computer. ⚠️ Important Safety and Hardware Considerations

A: Autokent provides an uninstaller. You can also go to Windows Settings > Apps > Find “Autokent MVCI MultiDriver” > Uninstall. Alternatively, use the unins000.exe located in the C:\Program Files (x86)\Autokent MVCI MultiDriver X64 directory.

: It supports interfaces with different firmware versions (e.g., v1.4.1 or v2.0.4), ensuring the Techstream software can see the "MVCI" option in the VIM Select menu. Some cables are "1

What are you trying to connect to (Techstream, HDS, etc.)?

If the installer asks for a folder path, point it to the driver folder within the extracted files. after the installation finishes. Phase 3: Finalizing and Testing Plug your MVCI cable into the USB port.

Right-click the device (often named USB Serial Converter ), click , and choose Browse my computer for drivers .