Amt-78 User Manual Jun 2026

Use only the manufacturer-approved USB charging block. Do not leave the device charging unattended for more than 24 hours.

For an arcade or amusement center, the manual is not just a guide but a maintenance blueprint. By following the maintenance schedule

If storing the AMT-78 for longer than three months, discharge the battery to roughly 50% and store it in a cool, climate-controlled environment. Error Codes & Troubleshooting Symptom / Error Code Potential Cause Recommended Action Completely depleted battery or firmware lockup. amt-78 user manual

If you are using an amplified antenna or a satellite LNB, ensure the "LNB Power" setting is toggled to ON (13V/18V) . For standard passive antennas, keep this OFF . 4. Understanding the Readings

Check the AC220V EU cable connection. If the switch LED is not lit, the PCB is not receiving power. Use only the manufacturer-approved USB charging block

Do not operate the device in explosive atmospheres, highly corrosive environments, or in the presence of flammable gases.

Mount the control box away from dense foam padding or tight, unvented spaces to prevent the 10A motor drivers from overheating. By following the maintenance schedule If storing the

, timer malfunctions, or erratic swing motion caused by dust on sensors or mechanical linkage wear. Value to the Operator

Switching Between 12-Hour (AM/PM) and 24-Hour (Military) Time

Do not submerge the main unit in water; only water-rated probes can withstand liquid contact.

Check probe connections or shield the testing area from wireless signals. Recalibration Schedules