If the cut leaves a stepped ridge, the scoring blade is set too wide or too deep. 4. Maintenance and Lubrication Schedule
Adjust the micro-metric screws until parallel spacing is achieved.
Online community forums (such as Woodweb, Canadian Woodworking, or UK Workshop) host active communities of vintage machine owners who frequently share scanned copies of older manuals. altendorf f90 manual
In the dusty, loud ecosystem of the woodworking shop, machines are often judged by their cast-iron weight or the decibels of their motors. Yet, for the serious craftsperson, a machine’s true soul is revealed not in its specifications, but in its manual. The —arguably the “Rolls Royce” of sliding table saws—possesses a manual that transcends the typical binder of exploded diagrams and torque specs. To read the F90 manual is to engage in a philosophical treatise on the nature of European engineering, the ritual of maintenance, and the silent contract between human and machine.
While configurations vary by year, a standard F90 typically features: Ranging from 2000mm to 3200mm. Motor Power: Generally 5.5 HP to 7.5 HP. If the cut leaves a stepped ridge, the
: For specific components, dedicated suppliers can be a good option. For example, specialized sites sell motor brakes for Altendorf F45 and F90 models from certain years.
Use a push stick for any rip cuts narrower than 120mm. The —arguably the “Rolls Royce” of sliding table
The rip fence must be perfectly parallel to the saw blade, or slightly lead away from the blade by a fraction of a millimeter at the rear. Isolate the machine from the power supply. Raise the main blade to its maximum height.
One of the most compelling chapters involves the riving knife and the blade guard. To the novice, these are annoyances. To the F90 manual, they are protagonists in a safety drama. The manual dedicates pages to the geometry of the riving knife relative to the blade’s kerf, treating misalignment as a tragic flaw. It tells cautionary tales (without pictures, thankfully) of kickback—the saw’s violent rejection of hubris. In this text, the guard is not a shield but a chaperone, ensuring that the dance between the operator’s hands and the 400mm scoring blade remains safe.
100mm to 120mm (on equipped models).
The rip fence must sit perfectly parallel to the saw blade, or lead slightly away from the back of the blade (0.1mm) to prevent wood binding and kickback. Loosen the locking bolts on the fence guide bar. Use a precision straightedge against the saw blade plate.
