The is a micro-ATX motherboard commonly found in legacy business desktops like the Acer Veriton S4610G . Built on the Intel Q65 Express chipset, this board is a stable choice for Sandy Bridge-era builds, though finding a single official PDF manual can be difficult due to its age. Core Specifications Socket: Intel LGA 1155. Chipset: Intel Q65 Express.
If you are currently troubleshooting this motherboard, tell me:
Before modifying, upgrading, or repairing a system utilizing the Acer Q65H2-AM v1.1, you must understand its core physical and architectural limitations. Specification Micro-ATX (mATX), roughly 244mm x 244mm CPU Socket LGA 1155 (Socket H2) Chipset Intel Q65 Express (Cougar Point) Memory Support 4 x 240-pin DDR3 DIMM slots (Dual-Channel) Maximum RAM 16 GB DDR3 (1066 / 1333 MHz, Non-ECC, Unbuffered) Expansion Slots 1x PCIe x16 (v2.0), 2x PCIe x1, 1x Legacy PCI Storage Ports acer q65h2-am v1.1 manual
You need the manual to know which jumper does what. Here are the three jumpers on the Q65H2-AM v1.1:
If you need the exact pinout of the 9-pon front panel connector or the 4-pin speaker header for v1.1, please provide a clear photo of the area near the bottom-right corner of the board, as there are two variants of v1.1 (Foxconn vs. Pegatron manufacture). The is a micro-ATX motherboard commonly found in
The Acer Q65H2-AM V1.1 features an LGA 1155 socket. It natively supports with a maximum thermal design power (TDP) of 95W . Supported Processors Intel Core i7: i7-2600, i7-2600S Intel Core i5: i5-2500, i5-2400, i5-2300 Intel Core i3: i3-2130, i3-2120, i3-2100 Pentium / Celeron: Dual-core Sandy Bridge models ECS Q65H2-AM (V1.1) - The Retro Web
If you're looking for a general overview of the motherboard, here are some specs: Chipset: Intel Q65 Express
Includes 5 SATA ports total: four SATA II (3.0Gb/s) and one high-speed SATA III (6.0Gb/s), often distinguished by color (e.g., a red port for the primary drive). Front Panel Header Pinout (14-pin)
The officially supports 2nd gen Intel Core (Sandy Bridge). Unofficially, with BIOS v1.1 or higher, it supports 3rd gen (Ivy Bridge).
OEM motherboards sometimes check for proprietary fan RPM signals or specific thermal sensors. If you receive a "Keyboard Error" or "System Fan Failure" warning on startup after moving the board to a new case, enter the BIOS and look for a setting to disable asset monitoring or change fan checks to "Ignore."