Remove the screws securing the cooling fan housing to the frame and lift the fan out. Clean any dust buildup out of the fan blades.
The motherboard sits on plastic standoffs.
Underneath the cover, you will find several large Phillips screws securing the metal stand to the internal chassis.
A set of or spudgers (a guitar pick or old credit card can also work in a pinch). A paperclip (for the optical drive).
Locate the rubber feet at the bottom of the back cover. Gently hinge them away or remove them to reveal the Phillips head screws underneath.
This comprehensive guide will walk you through the entire disassembly process safely, from removing the outer casing to accessing the motherboard. Pre-Disassembly Requirements and Tools
When clipping the rear cover back onto the front bezel, apply firm, even pressure along the outer borders until you hear distinct clicks signaling that the plastic latches have engaged fully.
If you are planning a specific upgrade or repair for your Acer Aspire ZC-610, let me know you are swapping out (like the hard drive , RAM , or cooling fan ), or what symptoms the machine is showing. I can provide targeted troubleshooting steps or part compatibility advice for your project. Share public link
Disclaimer: This guide is based on public teardown data and service manual schematics for the Acer Aspire ZC-610. Model variations may exist (e.g., touch vs. non-touch, DVD vs. no DVD). Proceed at your own risk. Always disconnect power and handle components with ESD care.
To organize different screw sizes. Critical Safety Steps:
: Remove the three visible screws along the bottom edge of the rear cover. Step 2: Releasing the Rear Cover Slide and Lift : Unlike standard desktops, the
Unscrew the mounting screws using your Phillips screwdriver. Lift the stand straight up and set it aside. Step 2: Removing the Outer Back Cover
